Description

The SPCE452.100 expander extends the SPC system via X-BUS with 8 fully programmable relay outputs. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander comes in a plastic housing with front and back tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

Technical data

Number of on-board relays

8 (single-pole changeover, 30 VDC / max. 1 A resistive switching current)

Interfaces

X-BUS (in, out, branch)

Tamper contact

Front spring tamper, back tamper

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 190 mA at 12 VDC (all relays activated)

Quiescent current

Max. 40 mA at 12V DC

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted

Colour

RAL 9003 (signal white)

Weight

0.400 kg

Dimensions (W x H x D)

200 x 153 x 47 mm (housing),
150 x 82 x 20 mm (PCB)

Housing

Plastic housing (ABS)

Standard / approval

EN50131-1 / EN50131-3, Grade 3, Class II
UK: PD6662:2010
BE: INCERT
SE: SFF1014, Larmklass 2

Documentation

Description

The SPCE651.100 expander extends the SPC system via X-BUS with 8 analysed zones and 2 fully programmable relay outputs. Analysed zones allow to connect inertia sensors. The zones and outputs on the expander function exactly as the zones and outputs on the SPC panel. Each zone can be configured for different zone monitoring requirements. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

Technical data

Number of on-board zones

8 (analysed)

EOL resistor

Dual 4k7 (default), other resistor combinations configurable

Number of on-board relays

2 (single-pole changeover, 30 VDC / max. 1 A resistive switching current)

Interfaces

X-BUS (in, out, branch)

Tamper contact

Front spring tamper

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 80 mA at 12 VDC (all relays activated)

Quiescent current

Max. 40 mA at 12 VDC

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted

Colour

RAL 9003 (signal white)

Weight

0.350 kg

Dimensions (W x H x D)

200 x 153 x 47 mm (housing),
150 x 82 x 20 mm (PCB)

Housing

Plastic housing (ABS)

Description

The SPCE652.100 expander extends the SPC system via X-BUS with 8 wired zones and 2 fully programmable relay outputs. The zones and outputs on the expander function exactly as the zones and outputs on the SPC panel. Each zone can be configured for different zone monitoring requirements. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander comes in a plastic housing with front and back tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

Technical data

Number of on-board zones

8

EOL resistor

Dual 4K7 (default), other resistor combinations configurable

Number of on-board relays

2 (single-pole changeover, 30 VDC / max. 1 A resistive switching current)

Interfaces

X-BUS (in, out, branch)

Tamper contact

Front spring tamper, back tamper

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 80 mA at 12 VDC (all relays activated)

Quiescent current

Max. 40 mA at 12 VDC

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted

Colour

RAL 9003 (signal white)

Weight

0.350 kg

Dimensions (W x H x D)

200 x 153 x 47 mm (housing),
150 x 82 x 20 mm (PCB)

Housing

Plastic housing (ABS)

Standard / approval

EN50131-1 / EN50131-3, Grade 3, Class II
UK: PD6662:2010
BE: INCERT
SE: SFF1014, Larmklass 2

Documentation

Description

The SPCE652.000 pcb only expander extends the SPC system via X-BUS with 8 wired zones and 2 fully programmable relay outputs. The zones and outputs on the expander function exactly as the zones and outputs on the SPC panel. Each zone can be configured for different zone monitoring requirements. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander features an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

Technical data

Number of on-board zones

8

EOL resistor

Dual 4K7 (default), other resistor combinations configurable

Interfaces


X-BUS (in, out, branch)

Tamper contact


Front spring tamper, back tamper - provided in kit bag

Operating voltage


9.5 ~ 14 VDC

Operating current

Max. 80 mA at 12 VDC (all relays activated)

Quiescent current

Max. 40 mA at 12 VDC

Operating temperature


-10 ~ +50 °C

Mounting

In SPC G2 and G3 cabinets or SPC expander housings

Weight

0.1000 kg

Dimensions (W x H x D)

150 x 82 x 20 mm (PCB)

Standard / approval


EN50131-1 / EN50131-3, Grade 3, Class II
UK: PD6662:2010
BE: INCERT
SE: SFF1014, Larmklass 2

(when mounted inside SPC Cabinet or expander housing)

Description

The SPCA210.100 2-door expander extends the SPC controller with advanced door control functionality for 2 entry doors or 1 entry/exit door. The device features 2 Wiegand/Clock&Data interfaces, 4 LED control outputs (1 void / valid per reader), 4 zones (1 position- and 1 opening switch per door), 2 relay outputs (1 lock per door) and an on-board buzzer to signal "door open too long" events.To allow greatest flexibility, the zones and outputs are freely programmable for other purposes if not used for door control. Up to 512 priority card holders can be stored on the expander for standalone operation in case of communication loss to the control panel. The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

Technical data

Number of on-board zones

4, for door release switch (DRS) and door position switch (DPS), or freely programmable

EOL resistor

Dual 4K7 (default), other resistor combinations configurable

Number of on-board relays

2, for door locks or freely programmable (single-pole changeover, 30 VDC / max. 1 A resistive switching current)

LED Indicators

4 outputs (1 void and 1 valid per reader)

Number of card reader

2

Interfaces

X-BUS (in, out, branch), Reader 1, Reader 2

Tamper contact

Front spring tamper

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 80 mA at 12 VDC (all relays activated)

Quiescent current

Max. 45 mA at 12 VDC

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted

Colour

RAL 9003 (signal white)

Weight

0.360 kg

Dimensions (W x H x D)

200 x 153 x 47 mm (housing),
150 x 82 x 20 mm (PCB)

Housing

Plastic housing (ABS)

Documentation

Description

The SPCE110.100 is a universal key switch expander with 2 tri-color LEDs, a 3-position key switch and buzzer. The freely programmable user interface indicates the configured status information with LEDs (e.g. key switch position, area setting states) and enables activation of application specific processes by changing the key switch position (e.g. unlock keypad or indication expander, setting of an area, open or close a gate). The expander also provides one freely programmable volt free relay output with either NO or NC terminal.

Technical data

Programmable key input

3 key positions (2-0-1 in 90° steps, cylinder type KABA1008C)

Number of on-board relays

1 (single-pole changeover, 30 VDC / max. 1 A resistive switching current)

LED Indicators

2 tri-color LEDs

Interfaces

X-BUS (in, out)

Tamper contact

Front / back tamper

Operating voltage

9.5 - 14 VDC

Operating current

Max. 50 mA at 12 VDC (relay and LEDs operated)

Quiescent current

Max. 30 mA at 12 VDC

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted

Colour

RAL 9003 (signal white)

Weight

0.270 kg

Dimensions (W x H x D)

112 x 92 x 38 mm

Housing

Plastic housing (Polycarbonate)

Approval

EN50131-1 / EN50131-3, Grade 3, Class II
UK: PD6662:2010
BE: INCERT
SE: SFF1014, Larmklass 2
DE: VdS-C

Documentation

Description

The SPCE120.100 is a universal display expander with 16 tri-color LEDs, 4 keys, integrated card reader and buzzer. In linked mode with a keypad the LEDs indicate the status of 4 areas in one glance and the areas can be directly set or unset with the assigned function keys. In flexible mode the freely programmable user interface indicates the configured status information with LEDs (e.g. open zones, area setting states) and enables activation of application specific processes by pressing the assigned function keys (e.g. setting of an area, open or close a gate). With the integrated card reader the indication or operation can be enabled for authorised users only by presenting a valid proximity card. The expander also provides one freely programmable zone which can be configured for different zone monitoring requirements.

Technical data

Number of on-board zones

1

EOL resistor

Dual 4K7 (default), other resistor combinations configurable

Special keys

4 function keys, freely programmable

LED Indicators

16 tri-colour LEDs

Card reader

Integrated (125kHz, EM 4102)

Interfaces

X-BUS (in, out)

Tamper contact

Front / back tamper

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 70 mA at 12 VDC (LEDs operated)

Quiescent current

Max. 30 mA at 12 VDC

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted

Colour

RAL 9003 (signal white)

Weight

0.190 kg

Dimensions (W x H x D)

112 x 92 x 28 mm

Housing

Plastic housing (Polycarbonate)

Approval

EN50131-1 / EN50131-3, Grade 3, Class II
UK: PD6662:2010
BE: INCERT
SE: SFF1014, Larmklass 2
DE: VdS-C

Documentation

Description

The SPCE530.000 expander extends the SPC system via X-BUS with 4 wired zones and 2 open collector outputs. The expander is plugged on the optionally available ADI-housings (GE-ADI / GE2-ADI).

Technical data

Number of on-board zones

4

EOL resistor

48.7 kOhm +/-2 %

Detection characteristics / range

Tamper open line: > 5.2 VDC,
Alarm: 4.1 ~ 5.1 VDC,
Quiescent: 3.5 ~ 3.9 VDC,
Tamper short circuit: < 3.4 VDC

Number of on-board open coll.

2 (max 14 VDC / 20 mA)

Operating voltage

9.5 ~ 14 VDC

Quiescent current

Max. 30 mA

Weight

0.030 kg

Dimensions (W x H x D)

77 x 66 x 35 mm (PCB)

Tamper

Front tamper

Operation temperature

-10 ~ +50 °C

Description

The SPCV340.000 Audio Expander extends the SPC system via X-BUS with an audio verification zone, 4 wired zones and 1 open collector output. The built in microphone and speaker allow pre- / post-event audio recording and live audio (listen / talk) between ARC/CMS and the SPC system. Up to 3 audio satellites (SPCV310/410) can be connected to the expander.

Technical data

Number of on-board zones

4

Number of on-board open coll.

1 (max. 400 mA resistive switching current)

LED Indicators

1 (red)

Audio

Loudspeaker: 5 W / 16 Ω,
Microphone: Foil electret condenser microphone

Expansion

Max. 3 audio satellites (SPCV310/410)

Interfaces

X-BUS (in, out),
Audio (A+, A-)

Tamper contact

Front / back tamper switch

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 75 mA at 12 VDC (without satellites)

Quiescent current

Max. 60 mA at 12 VDC (without satellites)

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted or corner-mounted at 45 °

Colour

RAL 9003 (signal white)

Weight

0.420 kg

Dimensions (W x H x D)

106 × 141 × 42 mm

Housing

Plastic housing (ABS)

Description

The SPCV341.000 Audio Expander extends the SPC system via X-BUS with an audio verification zone, 4 wired zones and 1 line output to drive an external audio pre-amplifier. The built in microphone and speaker allow pre- / post-event audio recording and live audio (listen / talk) between ARC/CMS and the SPC system. Up to 3 audio satellites (SPCV310/410) can be connected to the expander.

Technical data

Number of on-board zones

4

LED Indicators

1 (red)

Audio

Loudspeaker: 5 W / 16 Ω,
Microphone: Foil electret condenser microphone

Audio outputs

1 line output (100 Ω / 0.775V RMS, suitable for connection to audio pre-amplifier).

Expansion

Max. 3 audio satellites (SPCV310/410)

Interfaces

X-BUS (in, out),
Audio (A+, A-)

Tamper contact

Front / back tamper switch

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 75 mA at 12 VDC (without satellites)

Quiescent current

Max. 60 mA at 12 VDC (without satellites)

Mounting

Flat surface, wall-mounted or corner-mounted at 45 °

Colour

RAL 9003 (signal white)

Weight

0.420 kg

Dimensions (W x H x D)

106 × 141 × 42 mm

Housing

Plastic housing (ABS)

Operation temperature

-10 ~ +50 °C

Description

The SPCV310.000 Audio Satellite is connected to an Audio Expander (SPCV320/321/440) and expands the audio verification zone with an additional speaker and microphone.

Technical data

LED Indicators

1 (red)

Audio

Loudspeaker: 5 W / 16 Ω,
Microphone: Foil electret condenser microphone

Interfaces

Audio (A+, A-)

Tamper contact

Front / back tamper switch

Operating voltage

Powered via audio expander

Operating current

1 mA

Quiescent current

7 mA (incl. LED)

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted or corner-mounted at 45 °

Colour

RAL 9003 (signal white)

Weight

0.370 kg

Dimensions (W x H x D)

106 × 141 × 42 mm

Housing

Plastic housing (ABS)

Description

The SPCV440.000 Combi Audio Expander extends the SPC system via X-BUS with an audio verification zone, 4 wired zones and 1 open collector output. The built in microphone and speaker allow pre- / post-event audio recording and live audio (listen / talk) between ARC/CMS and the SPC system. Up to 3 audio satellites (SPCV310/410) can be connected to the expander. In addition any of the MAGIC motion detectors (12m version) seamlessly fit into the prewired device to allow full use of the superb MAGIC motion detector benefits.

Technical data

Number of on-board zones

4 (the MAGIC motion detector takes away 1 zone)

Number of on-board open coll.

1 (max. 400 mA resistive switching current)

LED Indicators

1 (red)

Audio

Loudspeaker: 5 W / 16 Ω,
Microphone: Foil electret condenser microphone

Expansion

Max. 3 audio satellites (SPCV310/410)

Interfaces

X-BUS (in, out),
Audio (A+, A-)

Tamper contact

Front / back tamper switch

Operating voltage

9.5 ~ 14 VDC

Operating current

Max. 75 mA at 12 VDC (without satellites or motion detector)

Quiescent current

Max. 60 mA at 12 VDC (without satellites or motion detector)

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted or corner-mounted at 45 °

Colour

RAL 9003 (signal white)

Weight

0.580 kg

Dimensions (W x H x D)

106 × 261 × 42 mm

Housing

Plastic housing (ABS)

Description

The SPCV410.000 Combi Audio Satellite is connected to an Audio Expander (SPCV440) and expands the audio verification zone with an additional speaker, microphone. In addition any of the MAGIC motion detectors (12m version) seamlessly fit into the prewired device to allow full use of the superb MAGIC motion detector benefits.

Technical data

LED Indicators

1 (red)

Audio

Loudspeaker: 5 W / 16 Ω,
Microphone: Foil electret condenser microphone

Interfaces

Audio (A+, A-)

Tamper contact

Front / back tamper switch

Operating voltage

Powered via audio expander

Operating current

1 mA (without motion detector

Quiescent current

7 mA (incl. LED, without motion detector)

Operating temperature

-10 ~ +50 °C

Mounting

Flat surface, wall-mounted or corner-mounted at 45 °

Colour

RAL 9003 (signal white)

Weight

0.550 kg

Dimensions (W x H x D)

106 × 261 × 42 mm

Housing

Plastic housing (ABS)