Description

The AC5102 advanced central controller can be programmed with up to 500‚000 cardholders and up to 96 doors. It has been specially designed for maximum flexibility‚ and provides six separate field level network (FLN) channels. Each FLN is capable of hosting up to 16 local devices for access control‚ monitoring input devices or controlling output devices. The AC5102 also has a diagnostic port that provides a direct connection to its micro-processor to facilitate the download of operating instructions (firmware). Firmware updates can be made without having to visit the controller cabinets. Communication to the host system occurs via a 10/100Mb Ethernet connection. This allows communications over any WAN or LAN where devices on the network can be assigned a unique IP address. This type of communication ensures the fastest possible transaction times between the host system and AC5102 field panels. The AC5102 hosts a tamper input that can be used to detect if the cabinet in which it has been mounted has been opened. It also provides an alarm output that can operate a visual or audio alarm when security has been breached.

Technical data

Additional components

ACK5110 cable for modem connection

Interface

6 x Field level network (FLN):
- FLN 1: RS232 (modem port) or RS422 / RS485
- FLN 2 & 3: RS232 / RS422 / RS485
- FLN 4‚5‚6: RS485 only
1 x RS232 (RxD‚ TxD‚ GND‚ RJ12)
2 x LAN: RJ45 (10/100 MB Ethernet)
1 x USB
1 x USB-PC

Operating voltage

12/24 VDC (-10 / +15%)

Power consumption

Max. 10 W (fully loaded)

Alarm input

1 x Tamper input‚ 1 x Power fail input

Alarm output

1 x Alarm output (optical relay‚ max. 12 V‚ 100 mA)

Door capacity

96

Card capacity

500‚000

Indicators

Power‚ Active‚ Error‚ COM‚ USB‚ SDCard‚ 4 x Ethernet

LCD Display

None

Keypad

None

Tamper switch

Optional

Operating temperature

0 to +50 °C

Environment

Indoor use only

Housing

Steel

Colour

Grey and blue

Dimensions (W x H x D)

124 x 220 x 54 mm

Weight

990 g

Approval

CE‚ UL294‚ C-Tick‚ FCC

Documentation

Description

The AC5200 is a smaller version of Vanderbilt’ high-performance IP-based advanced central controller models (AC5100 and AC5102). It can manage up to 40‚000 cardholders. The ACC-Lite has been specially designed to provide a low-cost alternative for smaller or branch installations. It provides one field level network (FLN) channel which is capable of hosting up to 8 doors for access control, monitoring input devices or controlling output devices. Firmware can be easily downloaded or updated via TCP/IP connection without having to visit the controller cabinets. Communication with the host system occurs via a two-port Ethernet switch which provides 10/100Mb LAN connection. This makes it possible to “daisy chain” controllers. TCP/IP communication ensures the fastest possible transaction times between the host system and the field panels. In case of power failure the database on the ACC-Lite is protected in battery-backed memory. This maintains the integrity of the access control data and ensures that the ACC-Lite is back online as soon as power is restored.

Technical data

Interface

Communication interfaces: RS232, RS485, TC/IP for LAN/WAN
- RJ45: 2 x Points, 10/100 MB Ethernet (Switched)
- RS485: FLN interface, two-wire, max. eight devices per FLN bus.
- RS232 modem communications

Operating voltage

8 to 40 VDC‚ 8 to 30 VAC

Current consumption

100 mA @24V DC
200 mA @12V DC

Power consumption

24 W

Door capacity

Eight

Card capacity

40,000

LCD Display

Alphanumeric

Keypad

4 x 4 matrix

Tamper switch

Integrated

Operating temperature

0 to +50 °C

Environment

Indoor use only

Housing

Plastic housing for wall mounting

Colour

White

Dimensions (W x H x D)

248 x 182 x 66 mm

Weight

0.70 kg

Approval

CE, C-Tick

Documentation

Description

The ACC-APM-1220 IP Door Controller with metal housing and 12V 2A Power Supply Unit (PSU) is ideal when, complete, easy-to-use door control is required. The ACC-APM-1220 has the full attributes offered by the ACC-AP IP Door Controller but in addition offers metal housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable. The incorporated PSU provides a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge. Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.

Description

The ACC-AP IP Door Controller is used for controlling up to two doors as part of the SiPass integrated Access Control system. The controller can be configured for 1 or 2 doors and can be programmed with up to 500‚000 cardholders. The ACC-AP offers the ability to connect four OSDP readers to be used for entry or exit and can be placed in different heights to accommodate for instance wheelchairs or garage barriers. The ACC-AP has 4 inputs, 2 relay outputs and 4 open-collector outputs. The inputs and outputs are user configurable to meet a majority of use cases. This controller is also capable of supporting FLN devices and of hosting units such as the 8IO, OPM and IPM.

Documentation

Description

The ACC-APM-2420 IP Door Controller with metal housing and 24V 2A Power Supply Unit (PSU) is ideal when, complete, easy-to-use door control is required. The ACC-APM-2420 has the full attributes offered by the ACC-AP IP Door Controller but in addition offers metal housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable. The incorporated PSU provides a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge. Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.