Description

The ADS5200 provides a Clock&Data/Wiegand interface between a card reader and the advanced central controller (AC5102 or AC5200) for one card reader. When a cardholder presents an access card at an entry or exit reader the ADS5200 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. Note: The ADS5200 does not have an RS485 interface for card readers. It supports Clock&Data or Wiegand readers only.

Technical data

Interface

FLN connection to controller: RS485
To readers:Clock&Data or Wiegand port

Operating voltage

12 VDC
±20 %

Power consumption

12 W

Outputs

1 x Lock output relay (30 VDC‚ 2 A)
1x Open-collector output (100 mA‚ 12 VDC)

Inputs

1 x REX-button
1 x Door contact
2 x Auxiliary
All inputs unsupervised or supervised

Tamper switch

Optional‚ auxiliary input

Firmware

Flash upgradeable

Indicators

Power‚ Activity‚ Communication

Dimensions (W x H x D)

125 x 125 x 34 mm

Weight

0.25 kg

Approval

CE‚ UL294‚ C-Tick

Documentation

Description

The ADS5210 provides a Clock&Data/Wiegand interface between a card reader and the advanced central controller (AC5100‚ AC5102 or AC5200) for one card reader. When a cardholder presents the access card at an entry or exit reader the ADS5210 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time. Note: The ADS5210 does not have an RS485 interface for card readers. It supports Clock&Data or Wiegand readers only.

Technical data

Interface

FLN connection to controller: RS485
To readers: Clock&Data or Wiegand port

Operating voltage

12 VDC
±20 %

Power consumption

12 W

Outputs

1 x Lock output relay (30 VDC‚ 2 A)
1x Open-collector output (100 mA‚ 12 VDC)

Inputs

1 x REX-button
1 x Door contact
2 x Auxiliary
All inputs unsupervised or supervised

Tamper switch

Optional‚ auxiliary input

Firmware

Flash upgradeable

Indicators

Power‚ Activity‚ Communication

Dimensions (W x H x D)

150 x 150 x 76 mm

Housing protection

IP55

Housing

ABS plastic

Weight

0.55 kg

Approval

CE

Documentation

Description

The ADD5100 provides an interface between a card reader and the advanced central controller (AC5102 or AC5200) for up to two card readers. When a cardholder presents an access card at an entry or exit reader the ADD5100 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.

Technical data

Interface

FLN connection to controller: RS485
To readers: One RS485 bus for up to two RS485 readers CerPass protocol) OR two Wiegand/Clock&Data ports

Operating voltage

24 VDC
±20 %

Power output

Reader: 300 mA
Ancillary: 1 A

Power consumption

25 W

Outputs

1 x Lock output relay (30 VDC‚ 2 A)
1 x Auxiliary relay (30 VDC‚ 2 A)

Inputs

1 x REX-button
1 x Door contact
3 x Auxiliary
All inputs unsupervised or supervised

Tamper switch

Optional‚ auxiliary input

Firmware

Flash upgradeable

Indicators

Power‚ Activity‚ Communication

Dimensions (W x H x D)

125 x 125 x 34 mm

Weight

0.3 kg

Approval

CE‚ UL294‚ C-Tick

Documentation

Description

The ADD5110 provides an interface between a card reader and the advanced central controller (AC5102 or AC5200) for up to two card readers. When a cardholder presents the access card at an entry or exit reader the ADD5110 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.

Technical data

Interface

FLN connection to controller: RS485
To reader: One RS485 bus for up to two RS485 readers (CerPass protocol) OR two Wiegand/Clock&Data ports

Operating voltage

24 VDC
±20 %

Power output

Reader: 300 mA
Ancillary: 1 A

Power consumption

25 W

Outputs

1 x Lock output relay (30 VDC‚ 2 A)
1 x Auxiliary relay (30 VDC‚ 2 A)

Inputs

1 x REX-button
1 x Door contact
3 x Auxiliary
All inputs unsupervised or supervised

Tamper switch

Optional‚ auxiliary input

Firmware

Flash upgradeable

Indicators

Power‚ Activity‚ Communication

Dimensions (W x H x D)

150 x 150 x 76 mm

Housing protection

IP55

Housing

ABS plastic

Weight

0.55 kg

Approval

CE

Documentation

Description

The ADD5160 provides an interface between a card reader and the advanced central controller (AC5102 or AC5200) for up to two card readers. When a cardholder presents an access card at an entry or exit reader the ADD5160 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.

Technical data

Interface

FLN connection to controller: RS485
To reader: One RS485 bus for up to two RS485 readers (CerPass protocol)
OR two Wiegand/Clock&Data ports

Operating voltage

24 VDC
±20 %

Power output

Reader: 300 mA
Ancillary: 1 A

Power consumption

25 W

Outputs

1 x Lock output relay (30 VDC, 2 A)
1 x Auxiliary relay (30 VDC, 2 A)

Inputs

1 x REX-button
1 x Door contact
3 x Auxiliary
All inputs unsupervised or supervised

Tamper switch

Optional, auxiliary input

Firmware

Flash upgradeable

Indicators

Power, Activity, Communication

Dimensions (W x H x D)

180 x 180 x 60 mm

Housing protection

IP66

Housing

ABS plastic

Weight

0.5 kg

Approval

CE

Documentation

Description

The ADE5300 provides a local interface between the advanced central controller (AC5100‚ AC5102 or AC5200) and up to 8 card readers. From the ADE5300‚ the information held within the access cards is transmitted to the controller. Each time an access attempt is made the controller verifies the data on the ID card and will then either allow or deny access. The ADE5300 can be configured to control up to 8 doors separately or up to 4 doors that include both entry and exit readers. All variations are possible; for example‚ you can have six single-reader doors and 1 dual-reader door connected to one ADE5300.

Technical data

Interface

FLN connection to controller: RS485
To readers: Support for eight readers via RS485 or Wiegand

Operating voltage

12 VDC ±10 % or 24 VDC -± 10 %

Power output

Reader: 8 x 400 mA‚ 12 VDC
Ancillary: 1 x 1.5 A‚ 12 VDC

Current consumption

Max. 2 A at 12 V, max. 1.5 A at 24 V

Outputs

8 x Lock output relay (30 VDC, 2 A)
8 x Open-collector output (100 mA, 9.7-12 VDC)
2 x Fire override relay (30 VDC, 2 A)

Inputs

8 x Door contact
8 x Request-to-exit
16 x Auxiliary
All inputs unsupervised or supervised
2 x Fire override (normal or enhanced mode)

Tamper switch

Optional, auxiliary input

Firmware

Flash upgradeable

Indicators

Power, Activity, FLN Communication, Reader bus communication, Input/output, Fire override

Dimensions (W x H x D)

250 x 287 x 50 mm

Weight

1.65 kg

Approval

CE, UL294, C-Tick

Documentation